M220 Alloy Wheel Lathe
Over the past few years, we have dedicated ourselves to pursue higher technological levels and strived to provide a number high-quality lathe models that will not only provide years of dependable performance but that will meet and exceed the market demand for the years to come.
In addition, we have enhanced and expanded our research and development programme to seek improvements which add value.
The M220 Alloy Wheel Lathe has the same construction features as larger lathes but with a lower centre of gravity which in turn reduces the footprint required for stability. Currently able to resurface most Oem derived alloy wheels up to 27 ins in diameter.
4 position electrical tool turret removable gap bed
MPG hand wheel headstock and oil cooler 15 hp spindle motor
Chip tray/conveyor rim hub mounted system
All castings are made of high tensile meehanite cast iron eliminating internal residual stress. Spindle & Gears are constructed from CR-MO alloy steel and precisely ground.
AC main spindle motors
Inverter controlled spindle drive, delivering constant spindle speed (C.S.S) in combination with automatic cross feed delivers greater cutting accuracy and efficiency for facing work associated with the cutting of alloy wheels.
Inverter controlled spindle braking.
Automatic lubrication system fitted as standard for extended service life.
Wide bed construction carefully designed for maximum stability and increased rigidity whist retaining a small foot print.
|Operating Controller||10 HP Spindle Motor||Quick change Tool Post||15 ins 3 jaw chuck with soft jaws||Automatic lubrication system||Coolant system and pump||Digitizing probe||Volateg 400V/3PH/50HZ|
Foot print dimensions:
The actual Machine dimensional sizes are shown opposite, we recommend that an 800mm access clearance is maintained around the machine to the rear, right and left hand side. This will give a footprint of width 4150mm depth 2700mm.
The minimum clearance for the access doors to open is 3736 mm width and 2500 mm depth.
A solid concrete floor slab, measuring no less than 150 mm In thickness not to include hard-core.